Water purification information

Do you know the components of a water purifier and their functions?

Views : 10316
Author : Susan
Update time : 2024-08-05 11:13:10
First of all, Susan will introduce to you today the components of ordinary self-flushing water purifiers, their names and their respective functions. The automatic control part of ordinary self-flushing water purifiers is to control the water-making function of the water purifier through the power on and off of each component.

Okay, let's get back to the point. Water purifiers are generally composed of the following parts:

1. PP cotton filter:
pore size 5 microns, sedimentation pre-filtration, remove dust, rust, gravel and other substances larger than 5 microns.

2. Granular activated carbon filter:
pre-filtration, remove chlorine odor, methane, pesticides, fertilizers and other substances.

3. Third-level PP cotton filter:
pore size 1 micron pre-filtration, remove fine particulate matter caused by the shedding of activated carbon.

4. RO membrane:
also called reverse osmosis membrane, it relies on the machine to exert pressure on the raw water, so that the water in the raw water passes through the RO membrane, and the fine impurities, excessive inorganic salts, organic matter, heavy metal ions, bacteria, viruses, pesticides, chloroform waste and other harmful substances in the raw water are all intercepted, and the harmful foreign matter and salt in these water are discharged through the continuous discharge of concentrated water, so as to obtain very clean drinking water. Its pore size is only 0.0001 micron, and its removal rate for the smallest inorganic salt ions in the water is more than 90-96%, and the removal rate for harmful foreign matter such as bacteria and viruses is more than 99.99% (theoretically it can be said to be 100%).

5. Post-antibacterial activated carbon:
remove odor to make the water sweet and sweet, and avoid secondary pollution of purified water in the pressure water storage tank.

6. Water inlet ball valve:
the total water inlet valve of the water purifier, open the water inlet ball valve, tap water enters the water purifier, the installation position is located at the side of the water inlet tee, which is convenient for turning off the water source during maintenance.

7. Low-pressure switch:
When the water pressure reaches 1.5kg/cm2, the power is turned on to make the machine run normally; when the water is cut off or the water pressure does not reach 1.5kg/cm2, the power is cut off and the machine emits a buzzer alarm. Prevent the water pump from running idle (when the source water pressure is lower than 0.5 kg/cm2 or the water is cut off, the low-pressure switch automatically cuts off the power to stop the whole machine.)

8. Water inlet solenoid valve:
When the power is turned on, the tap water passes through the water inlet solenoid valve to make water for the water purifier to make water normally; when the machine stops, the water source is cut off to prevent the water from passing through and draining it through the concentrated waterway.

9. High-pressure pump: Pressurize the tap water to 5--8 kg/cm2 to meet the pressure and flow requirements of RO membrane water production. To achieve the effect of pressurization, create a stable working environment for the RO membrane to work normally. Working pressure: 6-8 kg/cm2, equivalent to 100PSI.

10. Check valve: Also called one-way valve in engineering.
When the purified water is full and the pressure reaches 3kg/cm2, it prevents the high-pressure purified water from flowing back and being discharged with the waste water.

11. High-pressure switch:
Automatically controls the operation of the water purifier. When the pressure of purified water reaches 3kg/cm2, the power supply is cut off to stop the water purifier. When purified water is discharged from the system (for example, the faucet is opened to drain water), the water pressure decreases. When it decreases to 1.5kg/cm2, the power supply is automatically turned on to make the machine enter the normal water production state. Prevent the water pump from running full. (When the water in the pressure tank is full or reaches the set pressure, the high-pressure switch automatically cuts off the power supply or stops the whole machine.

12. Wastewater proportioner:
drain the concentrated water, limit the flow and hold the pressure through the small hole to ensure the working pressure of the RO membrane. The ratio of concentrated water to clean water is 1:3-1:5. Its function is to control the flow and ensure a constant system pressure. When the pressure in the membrane shell is insufficient, the wastewater proportioner will slow down the outward drainage speed. As the water in the membrane shell is full, the pressure in the membrane shell increases, allowing the source water to pass through the RO membrane smoothly to achieve the water production effect; on the contrary, when the pressure in the membrane shell is too high, the wastewater ratio will be faster to achieve a pressure relief effect to protect the RO membrane.

13. Flushing solenoid valve: automatically controlled by the machine (computer board), the water purifier has worked for 7.5 hours in total, and the power is turned on once, The RO membrane is flushed with high pressure and high flow, and the flushing time is 1 minute and 40 seconds.

14. Pressure water storage tank:
store clean water for backup, air pressure 0.4-0.8kg/cm2.
Function: reserve pure water
Empty barrel air pressure: 6-8PSI
Specifications: 1.5G, 2G, 3.2G, 4G, 11G, 20G, etc.
Scope of application: ordinary household 50G, 75G, 125G, 300G, 400G and other models generally use 3.2G barrels; large-capacity barrels are generally used on commercial machines.

15. Ball valve on pressure barrel:
water inlet or outlet valve of pressure water storage barrel.

16. Gooseneck faucet:
switch for taking pure water.

Our water purifiers generally include these accessories. If you have any questions or need to know, please contact us in time.
Related News
Read More >>
Why should you install a water purifier? This article will make you understand the importance of the existence of water filters! Why should you install a water purifier? This article will make you understand the importance of the existence of water filters!
Sep .13.2024
The emergence of water purifiers, so that the way of drinking water redefined, the emergence of water purifiers is because the water quality continues to change and the emergence of a way of drinking water; from the ability to drink the river water well water to the tap water to the bucket of water, to the current exceptionally hot water purifier market, is the environment affects the way of drinking water change rather than artificial to speak of this market hype up; like cell phones, because people really need, so the market is Will be hot, if put into a few years ago, the cell phone market is also the need for everyone to introduce.
Will water purifiers replace the bottled water? Will water purifiers replace the bottled water?
Sep .13.2024
We all know that in developed countries, water treatment technology is very advanced, the street just twist open a faucet can be directly drinking water, very convenient. Comparison of China, in recent years, with the industrial development, groundwater pollution is more serious, the residents of the daily drinking water can only be bottled water or water purifier-based. In these two competing ways of drinking water, household water purifiers will further replace the bottled water market?

In this regard, Susan will analyze for you. In the current drinking water environment, is still dominated by bottled water, although the water purifier will to a certain extent impact the bottled water market, but want to completely beyond is very difficult to realize, this is because bottled water has a variety of water purifier does not have the advantage.
How to choose a filtered water purifier: help you buy the best water purifier! Keep your water as pure as it can be! How to choose a filtered water purifier: help you buy the best water purifier! Keep your water as pure as it can be!
Sep .12.2024
In the face of today's water quality problems are becoming more and more serious, a high-performance water purifier has become a modern family almost a must-have thing. But in the variety of the market, how to buy a water purifier that really suits you? The purpose of this article is to reveal for you to buy a water purifier of the whole picture, to help you pick the desired product, so that your water back to pure.
Second, the face of water purification:
Understanding the types of water purifiersThere are many types of water purifiers, each of which has its own unique application scenarios and characteristics.1. Ultra-filtration water purifiers: suitable for relatively good water quality in the region, the main filtration of impurities and odors.2. Reverse osmosis water purifiers: known as water purification sector “all-rounders” to remove heavy metals, bacteria, viruses, etc., to provide more pure drinking water.3. Nanofiltration water purifiers: called water purification sector “all-rounders” to remove heavy metals, bacteria, viruses, etc., to provide a more pure drinking water. Nanofiltration water purifier: between ultrafiltration and reverse osmosis, able to filter out most of the harmful substances. 4. activated carbon water purifier: mainly relying on activated carbon adsorption of odor, pigmentation, etc..
Analysis and solutions to the causes of reverse osmosis membrane fouling Analysis and solutions to the causes of reverse osmosis membrane fouling
Sep .12.2024
Today Susan will introduce to you the analysis of the causes of reverse osmosis membrane pollution and the solutions to these problems.